FixVault
Home › Toyota › 2021 › Corolla LE › Repair and Diagnosis › Brakes › Traction Control › Brake Control System - Service Information › VSC Off Switch › Removal [01/2019 - 09/2022] › Procedure

Removal [01/2019 - 09/2022]: Procedure

  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (except Manual Transaxle) 

    for M20A-FKS: Refer to PROCEDURE - Step 1

    for 2ZR-FAE: Refer to PROCEDURE - Step 1

    for HV Model: Refer to PROCEDURE - Step 1

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) 

    Refer to PROCEDURE - Step 6

  3. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 3

  4. REMOVE FRONT CONSOLE UPPER PANEL GARNISH 

    Refer to PROCEDURE - Step 5

  5. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle) 

    Refer to PROCEDURE - Step 10

  6. REMOVE UPPER FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle) 

    Refer to PROCEDURE - Step 9

  7. REMOVE VSC OFF SWITCH (COMBINATION SWITCH ASSEMBLY) 
    1. except Manual Transaxle:
      1. Disengage the 4 claws to remove the VSC OFF switch (combination switch assembly) from the position indicator housing assembly.
        GTY904931Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. for Manual Transaxle:
      1. Disengage the 4 claws to remove the VSC OFF switch (combination switch assembly) from the upper front console panel sub-assembly.
        GTY904931Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault