FixVault
Home › Toyota › 2021 › Land Cruiser Base › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System - Service Information › Heated Oxygen Sensor › Inspection [08/2015 - ] › Procedure

Inspection [08/2015 - ]: Procedure

  1. INSPECT HEATED OXYGEN SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (HT1B) - 2 (+B)
      (for Bank 1)      		 20°C (68°F) 11 to 16 Ω
      1 (HT2B) - 2 (+B)
      (for Bank 2)

      If the result is not as specified, replace the heated oxygen sensor.

      GTY593376Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault