FixVault
Home › Toyota › 2021 › Land Cruiser Base › Repair and Diagnosis › Restraints › Restraints Control Systems › Pre-Collision Cancel Switch - Service Information › Pre-Collision System Cancel Switch › Installation [08/2015 - ] › Procedure

Installation [08/2015 - ]: Procedure

  1. INSTALL PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY 
    1. Attach the 2 claws to install the pre-collision system cancel switch assembly.
  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 29 [08/2015 - ]

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 31 [08/2015 - ]

  4. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 35 [08/2015 - ]

  5. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 36 [08/2015 - ]

  6. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 37 [08/2015 - ]

  7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 12 [08/2015 - ]

  8. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION 

    Refer to PROCEDURE - Step 13 [08/2015 - ]

About FixVault