Inspection [04/2018 -]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT VSC OFF SWITCH
- Make sure that there is no looseness at the locking part and the connecting part of the connector.
*a Component without harness connected
(VSC OFF switch)OK
The connector is securely connected.
- Disconnect the VSC OFF switch connector.
- Check both the connector case and the terminal for deformation and corrosion.
OK
No deformation or corrosion.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 5 (+) - 2 (E) Switch pushed Below 1 Ω 5 (+) - 2 (E) Switch not pushed 10 kΩ or higher HINT:
If the result is not as specified, replace the VSC OFF switch.
- Make sure that there is no looseness at the locking part and the connecting part of the connector.