FixVault
Home › Toyota › 2021 › Prius XLE AWD-e › Repair and Diagnosis › Electrical › Starter › Starting System Power Switch - Service Information › Power Switch › Removal [11/2017 - 08/2019] › Procedure

Removal [11/2017 - 08/2019]: Procedure

  1. REMOVE INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 14 [11/2017 - 12/2018] , or refer to PROCEDURE - Step 14 [12/2018 - 08/2019]

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except 11.6 Inch Display) 

    Refer to PROCEDURE - Step 15 [11/2017 - 12/2018] , or refer to PROCEDURE - Step 15 [12/2018 - 08/2019]

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL UPPER (for 11.6 Inch Display) 

    Refer to PROCEDURE - Step 16 [11/2017 - 12/2018] , or refer to PROCEDURE - Step 16 [12/2018 - 08/2019]

  4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY WITH NAVIGATION RECEIVER ASSEMBLY (for 11.6 Inch Display) 

    Refer to PROCEDURE - Step 17 [11/2017 - 12/2018] , or refer to PROCEDURE - Step 17 [12/2018 - 08/2019]

  5. REMOVE POWER SWITCH 
    1. Disengage the 2 claws and remove the power switch.
      GTY734358Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A except 11.6 Inch Display *B for 11.6 Inch Display
About FixVault