FixVault
Home › Toyota › 2021 › RAV4 LE, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (A25A-FKS) - Service Information › Camshaft Timing Control Motor › Removal [11/2018 - 08/2020] › Procedure

Removal [11/2018 - 08/2020]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to REMOVAL [11/2018 - 10/2019] , or refer to REMOVAL [10/2019 - 08/2020]

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 20 [11/2018 - 10/2019] , or refer to PROCEDURE - Step 20 [10/2019 - 08/2020]

  3. REMOVE NO. 2 ENGINE COVER 

    Refer to PROCEDURE - Step 5 [11/2018 - 10/2019] , or refer to PROCEDURE - Step 5 [10/2019 - 06/2020] , or refer to PROCEDURE - Step 5 [06/2020 - 08/2020]

  4. REMOVE CAM TIMING CONTROL MOTOR WITH EDU ASSEMBLY 
    1. Disconnect the cam timing control motor with EDU assembly connector.
      GTY771562Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 bolts and cam timing control motor with EDU assembly from the No. 2 timing chain cover assembly.
      NOTE:

      If the cam timing control motor with EDU assembly has been struck or dropped, replace it.

    3. Remove the cam timing control motor O-ring from the No. 2 timing chain cover assembly.
      GTY754319Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault