FixVault
Home › Toyota › 2021 › Tacoma TRD Pro, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (2GR-FKS) - Service Information › Heated Oxygen Sensor › Removal [08/2015 - ] › Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY 

    Refer to PROCEDURE - Step 3

  2. REMOVE CENTER NO. 2 FLOOR HEAT INSULATOR SUB-ASSEMBLY (for 4WD) 

    Refer to PROCEDURE - Step 5 [08/2015 - 11/2017] , or refer to PROCEDURE - Step 6 [11/2017 - ]

  3. REMOVE EXHAUST PIPE STOPPER BRACKET (for 4WD) 

    Refer to PROCEDURE - Step 6 [08/2015 - 11/2017] , or refer to PROCEDURE - Step 7 [11/2017 - ]

  4. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY 

    Refer to PROCEDURE - Step 6

  5. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) 
    1. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
      GTY694267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • SST: 09224-00011 
  6. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) 
    1. Using SST, remove the heated oxygen sensor from the front No. 2 exhaust pipe assembly.
      GTY688349Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • SST: 09224-00011 
About FixVault