FixVault
Home › Toyota › 2022 › GR86 Base, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - Service Information › Heated Oxygen Sensor › Inspection [11/2021 - ] › Procedure

Inspection [11/2021 - ]: Procedure

  1. INSPECT HEATED OXYGEN SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68 °F) 5.0 to 6.4 Ω

      If the result is not as specified, replace the heated oxygen sensor.

      GTY1049495Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Heated Oxygen Sensor)
About FixVault