Installation [05/2022 - ]: Procedure

INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY

NOTE:

If the mass air flow meter sub-assembly has been struck or dropped, replace it.
If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.
Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.

PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.
  - for Gasoline Model:
    Refer to INITIALIZATION [11/2021 - ]
  - for HEV Model:
    Refer to INITIALIZATION [05/2022 - 08/2024] , or refer to INITIALIZATION [08/2024 - ]