FixVault
Home › Toyota › 2023 › GR86 Base, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - Service Information › Camshaft Oil Control Valve › Inspection [11/2021 - ] › Procedure

Inspection [11/2021 - ]: Procedure

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 6.85 to 7.65 Ω

      If the result is not as specified, replace the camshaft timing oil control valve.

      GTY1046566Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Camshaft Timing Oil Control Valve)
About FixVault