FixVault
Home › Toyota › 2024 › Land Cruiser Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - Service Information › Knock Sensor › Inspection [02/2024 - ] › Procedure

Inspection [02/2024 - ]: Procedure

  1. INSPECT KNOCK CONTROL SENSOR 
    1. Measure the resistance.

      Standard Resistance

      Tester Connection Condition Specified Condition
      D33-1 (EKNK) - D33-2 (KNK1) 25°C (77°F) 120 to 280 kΩ
      GTY1220213Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Knock Control Sensor)
    2. If the result is not as specified, replace the knock control sensor.
About FixVault