FixVault
Home › Toyota › 2025 › Crown Signia XLE › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - Service Information › Knock Sensor › Inspection [06/2024 - ] › Procedure

Inspection [06/2024 - ]: Procedure

  1. INSPECT KNOCK CONTROL SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1244711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Knock Control Sensor)

      Standard Resistance

      Tester Connection Condition Specified Condition
      G5-1(EKNK) - G5-2(KNK1) 25°C (77°F) 120 to 280 kΩ
    2. If the result is not as specified, replace the knock control sensor.
About FixVault