FixVault
Home › Toyota › 2025 › RAV4 Plug-In Hybrid SE › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (A25A-FXS) - Service Information (PHEV) › Knock Sensor › Removal [06/2020 - ] › Procedure

Removal [06/2020 - ]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [06/2020 - ]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the knock control sensor connector.
      GTY868596Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock control sensor from the cylinder block sub-assembly.
      NOTE:

      If the knock control sensor has been struck or dropped, replace it.

About FixVault