FixVault
Home › Toyota › 2025 › Tacoma Trailhunter › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - Service Information › Ignition Coil And Spark Plug › Removal [12/2023 - 03/2024] › Procedure

Removal [12/2023 - 03/2024]: Procedure

  1. DISCONNECT ENGINE WIRE 
    1. GTY1184792Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE IGNITION COIL ASSEMBLY 
    1. GTY1193815Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an 8 mm socket wrench, remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.
        NOTE:

        If an ignition coil assembly has been struck or dropped, replace it.

  3. REMOVE SPARK PLUG 
    Refer to REMOVAL [12/2023 - ]
About FixVault