Rear Parking Assist Sensor Removal And Installation/Replacement

Mobile Repair Possible:  No

Removal Procedure: 

The procedure for all 6 components is the same. 

1. Remove rear bumper fascia. Refer to REAR BUMPER FASCIA REMOVAL AND INSTALLATION/REPLACEMENT
2. Unlock and disconnect electrical connector (1).
3. Unlock the latches with a screwdriver in arrow direction and pull the rear parking assist sensor (1) out of the bracket.

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following.
2. Install rear bumper fascia. Refer to REAR BUMPER FASCIA REMOVAL AND INSTALLATION/REPLACEMENT