FixVault
Home › Volkswagen › 1995 › Passat GLS, 2.0 C, Automatic › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul › Ignition System › Distributor › Removal & Installation

Removal & Installation

  1. Distributor removal procedure not available at time of publication. To install distributor, ensure cylinder No. 1 is at TDC of compression stroke.
  2. Align mark on camshaft sprocket with mark on rear toothed-belt guard. Turn rotor so that it points to cylinder No. 1 mark on distributor housing. Insert distributor into engine. Check ignition timing.
About FixVault