Readiness code, generating: Notes

Requirements

Fig 1: Fuses In E-Box (Plenum Chamber, Right)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Refer to Electrical Wiring Diagrams and Component Locations

Fig 2: Fuses In Fuse Box (Instrument Panel, Left)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Refer to Electrical Wiring Diagrams and Component Locations

Battery voltage (both batteries) must be at least 11.5 Volts.
All electrical consumers, such as, lights and rear window defroster, must be switched off.
For vehicles with automatic transmission, selector lever must be in -P-.
If vehicle is equipped with an A/C system, it must be switched off.

Ground (GND) connections between engine, transmission, and chassis must be OK.
There must not be any DTCs stored in DTC memory. Refer to Diagnostic mode 3: Check DTC Memory , Diagnostic mode 3: Check DTC memory.
Intake air temperature 5 to 35 ° C. Refer to Diagnostic mode 1: Check measured values , Diagnostic mode 1: Check measured values; PID 15: Intake Air Temperature (IAT)