Integrated Control Unit: Installing

CAUTION:

Do not to touch the sensor terminals on the HCU side or the contact pads on the ABM side as this may result in contamination and issues in the future.

-- Align components and install the ABM (1) on the HCU (2).

Fig 1: Identifying ABM, HCU And Solenoid Valve Stems

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the four screws (1) attaching the ABM (2) to the HCU. Tighten the mounting screws to 3 Nm (27 in. lbs.).

Fig 2: Identifying ABM Mounting Screws

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the ICU in the vehicle. Refer to INTEGRATED CONTROL UNIT .