Test Step 3 - Liftgate Open Driver Circuit Open

Fig 1: Testing Liftgate Open Driver Circuit Open

GWWUS74291

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Disconnect the power liftgate drive unit harness connector.
Measure the resistance of the liftgate open driver circuit between the PLG C1 connector and the PLG drive unit connector.

Is the resistance less than 5.0 ohms?

No

Repair the liftgate open driver circuit for an open.
Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

Yes

Go to Test Step 4 Test Step 4 - Liftgate Close Driver Circuit Open