Test Step 6 - Full Open Switch Circuit Open

Fig 1: Full Open Switch Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Disconnect the power liftgate module C1 harness connector.
• Measure the resistance of the full open switch circuit between the power liftgate drive unit connector and the power liftgate module C1 connector.

Is the resistance less than 5.0 ohms?

Yes

• Go to Test Step 7 Test Step 7 - Liftgate Full Open Switch Sense Circuit Short to Ground 

No

• Repair the full open switch circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .