3.2.1 Control Module for Adaptive Cruise Control, Removing And Installing, Version 1

NOTE: If the Control Module for Adaptive Cruise Control - J428- is replaced, start the respective function using the Vehicle Diagnostic Tester.

Removing

Remove the VW emblem from the radiator grille. Refer to Body Exterior (Name Badges and Emblems; Front Emblems, Removing and Installing).
Release the tabs -2-.
At the same time, pivot the Control Module for Adaptive Cruise Control - J428- -1- out of the radiator grille in the direction of -arrow-.
Release and disconnect the connector -3-.

Installing

Install in reverse order of removal and note the following:

The Control Module for Adaptive Cruise Control - J428- must engage audibly and securely in the radiator grille.
If necessary, calibrate the adaptive cruise control (ACC). Refer to 3.3 Adaptive Cruise Control, Calibrating