Peripheral Camera Control Module -J928-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment.

-- Move the ignition key outside of the vehicle to prevent switching on the ignition unintentionally.

-- Raise the front seat into its highest position and then move it all the way back.

-- Slide the module carrier -2- together with the control module -1- outward and slightly lift at the center tunnel in direction of -arrow A-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pivot out the module carrier -2- with the control module -1- from the outer mount in direction of -arrow B-.

-- Turn around the module carrier -2- with the control module -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connectors from the control module -1-.

-- Remove the control module -1- from the module carrier -2- in direction of -arrow-.