Overview - Assembly Mounts

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Assembly Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Pendulum Support
- Removing and installing. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
Bolt
- Tightening specification and sequence. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Always replace
Bolt
- Tightening specification and sequence. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Always replace
Bolt
- Tightening specification and sequence. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Always replace
Bolt
- 60 Nm + 90°
- Always replace
Bolt
- 50 Nm + 90°
- Always replace
Transmission Mount
- With support arm
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Engine Support
Bolt
- 50 Nm + 90°
- Always replace
Engine Mount
- With support arm
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
Bolt
- 40 Nm + 90°
- Always replace
Bolt
- 20 Nm + 90°
- Always replace
Bolt
- 60 Nm + 90°
- Always replace
Bolt
- 40 Nm + 90°
- Always replace