Blind Spot Detection Control Module -J1086- / Blind Spot Detection Control Module 2 -J1087-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
CAUTION:
The blind spot detection calibration normally occurs automatically.
-- Check the connector for damage, contact corrosion and water ingress, and service if necessary. Refer to WIRING HARNESSES AND CONNECTORS, REPAIRING .
| Nuts | Tightening Specification |
|---|---|
| Nut at the bracket | 3.5 Nm |
- Refer to OVERVIEW - BUMPER COVER .