ATF Cooler, Removing And Installing, Rectangular Version: Installing
- Tightening specification. Refer to OVERVIEW - ATF CIRCUIT .
Install in reverse order of removal while paying attention to the following:
NOTE:
Always replace the O-rings.
-- Install the catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .
-- Connect the coolant hoses to the ATF cooler according the markings made during the removal.
-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .
-- Install the battery tray and the battery. Refer to BATTERY TRAY, REMOVING AND INSTALLING .
-- Check the ATF level. Refer to ATF .
-- Install the engine cover and the air filter. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .