Peripheral Camera Control Module -J928-, Removing And Installing: Removing

-- Raise the front seat into its highest position and then move it all the way back.

-- Turn off the ignition and all electrical equipment.

-- Move the ignition key outside of the vehicle to prevent switching on the ignition unintentionally.

-- Remove the expanding rivets -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the cover -1- with the peripheral camera control module, straight in the direction of travel, while paying attention to the connected wires and turn.

-- Release and disconnect the connectors -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the catches on the cover -1- in the direction of the -arrows-.

-- At the same time remove the control module -2- from the cover -1-.