Tests W/Codes - Non-Turbo

• Introduction
• Self-Diagnostic System
• Fuel System (Self-Diagnostics)
  • Fuel System Diagnostics
• Entering Self-Diagnostics (Fuel System)
  • Control Functions
    • Notes
    • Control Function No. 1 (Accessing Codes)
    • Control Function No. 2 (Activating Breaker)
    • Control Function 3 (Tests Fuel Injector & Idle Valve Circuits)
• Retrieving Codes (Fuel) Control Function No. 1
  • Notes
  • Fuel System Diagnostics
• Fuel System Fault Code Testing
  • Notes
  • Code 1-1-3 (Short Term Fuel Trim Too Lean/ Rich)
  • Code 1-3-1 (Ignition System Rpm Signal)
  • Code 1-5-4 (EGR Flow Too High)
  • Code 2-2-3 (Idle Valve Signal)
  • Code 3-1-1 (Speedometer Signal)
  • Code 3-1-2 (Knock/Fuel Enrichment)
• Entering Self-Diagnostics (Fuel) Control Function No. 2
  • Activate Breakers
• Entering Self-Diagnostics (Fuel) Control Function No. 3
  • System Adjustment
• Fault Tracing Procedure (Fuel System)
• Diagnostic Unit Led Does Not Flash
• Ignition System (Self-Diagnostics)
  • Ignition System Diagnostics
• Entering Self-Diagnostics (Ignition System) Control Functions
  • Notes
  • Control Function No. 1 (Accessing Codes)
  • Control Function 2 (Activating Breakers)
  • Control Function 3 (Testing EGR Converter - CALIFORNIA Only)
  • Retrieving Codes (Ignition System) Control Function No. 1
• Ignition System Diagnostics
• Ignition System Fault Code Testing
  • Notes
  • Code 1-4-3 (Knock Sensor Signal)
  • Code 1-4-4 (Fuel System Ecu Load Signal)
  • Code 2-1-4 (Permanent/Magnet Generator Or Engine Speed Sensor Signal)
  • Code 2-3-4 (Throttle Switch Signal)
• Erasing Diagnostic System Memory
• Summary