FixVault
Home › Volvo › 1990 › 760 GLE, AW71 › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Circuit Tests › Ecu Power Circuits

Ecu Power Circuits

  1. Turn ignition on. Disconnect ECU connector. See Figure and Figure . Connect negative lead of DVOM to ground. Check for voltage at terminal No. 25 (while depressing brake pedal), and at terminals No. 27, No. 28 and No. 29 of ECU connector. All terminals should have battery voltage present except for terminal No 29 (.5-1.0 volt).
  2. If no voltage is present at following terminals, perform appropriate repair:
    • No. 25 - Check brake light switch. Replace if defective.
    • No. 27 - Replace defective solenoid relay.
    • No. 28 - Replace defective pump relay.
    • No. 29 - If voltage reading at terminal No. 27 is correct, voltage at terminal No. 29 should be .5-1.0 volt. If voltage at terminal No. 29 is not correct, replace solenoid relay.
About FixVault