Test Mode No. 2

This function is activated by briefly pressing test button "A" 2 times, causing LED to rapidly flash. Control unit will flash a code indicating receipt of a signal from following components:

• 3-3-2 - Throttle switch (throttle moved from idle).
• 3-3-3 - Throttle switch (throttle moved from WOT).
• 1-2-4 - Starter inhibitor switch, when gear selector is moved from a drive position to N or P.
• 1-4-1 - Timing pick-up, when starter motor is running.
• 1-1-4 - ECC control panel, when A/C button is depressed or released.
• 1-3-4 - Relay in ECC power unit energizing A/C compressor clutch when A/C is on.