Sensor Rotor: Installation
- Press new sensor rotor onto hub. Slide sensor rotor onto spindle. Install outer wheel bearing and nut. Tighten nut to 42 ft. lbs. (57 N.m) while turning rotor. Loosen nut 1/2 turn. Ensure outer bearing inner race is not stuck. Tighten nut finger tight, then tighten nut to closest hole and insert cotter pin.
- Install brake rotor. Install brake caliper using new attaching bolts. Tighten caliper bolts to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.