Mode Selector Switch
- Ensure ignition switch is off. Disconnect mode selector switch from center bracket. Disconnect switch connector from switch. Using a DVOM, measure resistance between switch terminals No. 2 (Green/Orange wire) and No. 5 (Black wire) when switch is in SPORT mode. Resistance should be infinite. When mode selector switch is moved to any other position, continuity should exist. If resistance is not as specified, replace mode selector switch. If resistance is as specified, go to next step.
- Measure resistance between switch terminals No. 3 (Brown/Gray wire) and 5 (Black wire) when switch is in ECON mode. Resistance should be infinite. When mode selector switch is moved to any other position, continuity should exist. If resistance is not as specified, replace mode selector switch.