Activating Components & Functions
WARNING: This page is about a different car, the 1998 Volvo V70 and 1998 Volvo S70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Components and functions can be activated individually with this function. Engine must not be running when activating components and functions.
Using scan tool in DIAGNOSTIC MODE, the following components can be activated:
- PAIR Injection System Pump
- PAIR Injection System Solenoid
- Fuel Pump
- EVAP Valve
- EVAP Canister Shut-Off Valve
- Heated Oxygen Sensor (Front Or Rear)
- Engine Cooling Fan (Low Speed Or High Speed)
- Injector (No. 1, 2, 3, 4 Or 5)
- Idle Air Control Valve
- A/C Relay
- Engine Speed Signal To Combined Instrument Panel
- Engine Temperature Signal To The Combined Instrument Panel
- Malfunction Indicator Lamp
- Load Signal To Transmission Control Module