Transmission - Cleaning, Inspection And Adjustment

• Automatic Transmission (Aw55-50/51SN; 2001-2004)
  • Adjusting the keylock cable
    • Checking and adjusting the cable in the center console
    • Checking and adjusting the cable at the steering wheel lock cylinder
  • Adjusting the mechanical cable for the transmission
    • Adjusting the transmission cable
      • Move the gear selector to position R
      • Setting R position
      • Installing the transmission cable
      • Check
  • Checking and adjusting the gear-shift position sensor
    • Notes
    • Removal
      • Removing engine compartment components
      • Remove the transmission cable from the lever. Move the cable to one side
      • Checking the setting
      • Adjusting the gear-shift position sensor
    • Installation
      • Installing the lever
      • Installing engine compartment components
      • Checking diagnostic trouble codes (DTCs)
  • Checking and adjusting the oil
    • Notes
    • Checking the oil level
      • Conditions
      • Preparing to check the oil level
      • Move the gear selector through all positions. Wait in each position for approximately 3 seconds
      • Low level (topping up)
      • High level (overfilling)
      • Drain off oil
    • Oil quality check
      • Check the oil
  • System pressure/stall speed, check
    • Notes
    • Oil level check
    • Manometer connection
    • Idle speed check
    • System pressure check
    • Stall speed check
    • Check
    • High stall speed
    • Low stall speed
    • Finishing
• Checking And Adjusting Mechanical Components (Aw50-42; 2000)
  • Adjusting gear selector cable
    • Preparations
      • Removing
      • Disconnecting transmission cable
    • Adjusting the transmission cable
      • Move the gear selector to position R
      • Setting R position
      • Installing the gear selector cable
      • Check
    • Finishing
      • Installing components
  • Checking and adjusting the gear-shift position sensor
    • Notes
    • Preparations
      • Preparations, removing
    • Checking and adjusting gear-shift position sensor
      • Check
      • Adjustment
    • Installation
      • Installing components
      • Installing engine compartment components
      • Checking diagnostic trouble codes (DTCs)
  • Checking engagement time
    • Notes
    • Preparations
    • Measuring engagement time from N to D
    • Measuring engagement time from N to R
    • Engagement time too long
  • Checking manual shifting
    • Disconnecting control module
    • Check
    • Incorrect result
• Checking Oil And Line Pressure (Aw50-42; 2000)
  • Checking oil level
    • Notes
    • Conditions
      • Oil level temperature information
      • Preparations
      • Move the gear selector through all positions, stopping in each position for approx. 3 seconds
    • Low level (topping up)
      • Top up with oil through the dipstick pipe
    • High level (overfilling)
      • Notes
      • Drain off oil
  • Oil, quality check
    • Check the oil
  • System pressure and stall speed, check
    • Notes
    • Oil level, check
    • Manometer, connection
    • Idle speed, check
    • System pressure, check
      • Notes
      • Stall speed and system pressure
      • Check
      • High stall speed
      • Low stall speed