FixVault
Home › Volvo › 2000 › V70 R › Repair and Diagnosis › Body & Frame › Power Windows › Adjustments › In-And-Out Adjustment › C70 Convertible (Rear Side Windows)

C70 Convertible (Rear Side Windows)

  1. Remove rear quarter trim panel from vehicle. See POWER WINDOW MOTOR  under REMOVAL & INSTALLATION. Make sure window is rolled completely up, door is closed and convertible top is in UP position.
  2. Start adjusting the window with 4 adjuster bolts that are similar to adjuster screws ("A") on front doors so that it just begins to touch the "C" pillar sealing strip and the sealing strip between the front door glass and rear side window glass. See Figure . After obtaining these preliminary adjustments, adjust the window so that it touches the entire sealing strip between the "C" pillar and the "B" pillar. Roll window up and down, open and close door and check adjustment.
About FixVault