Cruise Control, Engine Control, Switches - Symptom Related Diagnostic Procedures (Coupe)

• Checking Control Module Communication (B5234T3; B5254T; 1998)
  • Checking control module communication
  • Fault-tracing information
• Checking Diagnostic Trouble Codes (DTCS) (B5234T3; B5254T; 1998)
  • Checking diagnostic trouble codes (DTCs)
• Checking Disconnected Park/Neutral Position (PNP) Function Circuit (B5234T3; B5254T; 1998)
  • Checking Park/Neutral position (PNP) switch
  • Response code information
• Checking Disconnected Stop (Brake) Light Circuit (B5234T3; B5254T; 1998)
  • Checking disconnected stop (brake) light circuit
  • Response code information
• Checking Disconnected Switch, Brake Valve Or Clutch Valve (B5234T3; B5254T; 1998)
  • Checking disconnected switch, brake valve or clutch valve
  • Response code information
• Checking Disengagement Cause (B5234T3; B5254T; 1998)
  • Checking disengagement cause
• Checking Non-Connected Or Disconnected Power Supply (B5234T3; B5254T; 1998)
  • Checking non-connected or disconnected power supply
  • Response code information
• Checking On/Off Selector Switch, Brake Valve And Clutch Valve (B5234T3; B5254T; 1998)
  • Checking ON/OFF selector switch, brake valve and clutch valve
  • Response code information
• Checking Park/Neutral Position (PNP) Switch (B5234T3; B5254T; 1998)
  • Checking Park/Neutral position (PNP) switch
  • Response code information
• Checking Resume Switch (B5234T3; B5254T; 1998)
  • Checking RESUME switch
  • Response code information
• Checking Safety Disengagement (B5234T3; B5254T; 1998)
  • Checking safety disengagement
  • Response code information
• Checking Set- Switch (B5234T3; B5254T; 1998)
  • Checking SET- switch
  • Response code information
• Checking Set+ Switch (B5234T3; B5254T; 1998)
  • Checking SET+ switch
  • Response code information
• Checking The Stop (Brake) Light Switch (B5234T3; B5254T; 1998)
  • Checking the stop (brake) light switch
  • Response code information
• Checking The Vacuum System (B5234T3; B5254T; 1998)
  • Checking the vacuum system
  • Fault-tracing information
• Service Work (B5234T3; B5254T; 1998)
  • Diagnostic Test Mode (DTM) 2. Cruise control (gasoline engines)
    • Preparation
      • Connecting Volvo Scan Tool
      • Diagnostic Test Mode (DTM) 2
    • Connecting the Volvo Scan Tool (ST)
      • Connecting the Volvo Scan Tool (ST)
      • Data link connector (DLC) terminal, engine compartment
      • Data link connector (DLC) terminal, passenger compartment
  • Diagnostic Test Mode (DTM) 5. Cruise control (gasoline engines)
    • Preparation
      • Conditions
      • Test driving
      • Diagnostic Test Mode (DTM) 5
      • Connecting Volvo Scan Tool
    • Connecting the Volvo Scan Tool (ST)
      • Connecting the Volvo Scan Tool (ST)
      • Data link connector (DLC) terminal, engine compartment
      • Data link connector (DLC) terminal, passenger compartment
  • Erasing diagnostic trouble codes (DTCs). Cruise control
    • Erasing diagnostic trouble codes (DTCs)
  • Reading off diagnostic trouble codes (DTCs). Cruise control (gasoline engines)
    • Preparation
      • Conditions
      • Test driving
      • Reading off diagnostic trouble codes (DTCs)
      • Connecting Volvo Scan Tool
    • Connecting the Volvo Scan Tool (ST)
      • Connecting the Volvo Scan Tool (ST)
      • Data link connector (DLC) terminal, engine compartment
      • Data link connector (DLC) terminal, passenger compartment
    • Communication problems
      • Communication problems
    • Communication problems, cable disconnected or ignition off
      • Communication problems, cable disconnected or ignition off
    • Checking control module communication
      • Checking Volvo Scan Tool (ST) power supply
      • Checking Volvo Scan Tool (ST)
      • Checking control module ground terminal
      • Checking for an open-circuit
      • Checking the control module power supply
      • Checking fuse
      • Checking for a short-circuit
      • Checking 15-supply to fuse
      • Checking for an open-circuit, cable between fuse 11/28 and control module
      • Checking for an open-circuit before fuse 11/28
      • Checking communication cable to data link connector (DLC)
      • Checking the communication cable
      • Checking control module communication
      • Checking for contact resistance and oxidation
    • Connection
      • Connection of Volvo Scan Tool (ST)
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Connection of Volvo Scan Tool (ST)
      • Connection of Volvo ST
      • Connection to DLC, engine compartment
      • Connection to DLC, passenger compartment
    • Fault-tracing information
      • Fault-tracing information