Transmission Control Module (TCM) - Diagnostic Trouble Codes - 5 Of 8

• TCM-0100: Poor Gear Shifting Quality (Aw50/51 AWD; Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Poor gear shifting quality
    • Preparation
      • Checking diagnostic trouble codes (DTCs)
      • Checking for contact resistance and oxidation
      • Replacing the control system
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0100: Poor Gear Shifting Quality (Aw50/51 AWD; Aw55-50/51SN; 2001)
  • Diagnostic trouble code (DTC) information
  • Poor gear shifting quality
    • Preparation
      • Checking diagnostic trouble codes (DTCs)
      • Checking for contact resistance and oxidation
      • Replacing the control system
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0100: Poor Gear Shifting Quality (Aw50/51 AWD; Aw55-50/51SN; 2003-2007)
  • Diagnostic trouble code (DTC) information
  • Poor gear shifting quality
    • Preparation
      • Checking diagnostic trouble codes (DTCs)
      • Checking for contact resistance and oxidation
      • Replacing the control system
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0101: Shift Solenoid S3, Signal Too High (Aw50/51 AWD; Aw55-50/51SN; 2003-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking the wiring
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0101: Shift Solenoid S3, Signal Too High (Aw50/51 AWD; Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking the wiring
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0101: Shift Solenoid S3, Signal Too High (Aw50/51 AWD; Aw55-50/51SN; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking the wiring
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0102: Shift Solenoid S3, Signal Missing (Aw50/51 AWD; Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking the resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0102: Shift Solenoid S3, Signal Missing (Aw50/51 AWD; Aw55-50/51SN; 2003-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0102: Shift Solenoid S3, Signal Missing (Aw50/51 AWD; Aw55-50/51SN; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0103: Shift Solenoid S3, Signal Too Low (Aw50/51 AWD; Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking the resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0103: Shift Solenoid S3, Signal Too Low (Aw50/51 AWD; Aw55-50/51SN; 2003-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0103: Shift Solenoid S3, Signal Too Low (Aw50/51 AWD; Aw55-50/51SN; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0107: Shift Solenoid S4, Signal Too High (Aw50/51 AWD; Aw55-50/51SN; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S4
      • Checking solenoid S4
      • Checking the wiring
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0107: Shift Solenoid S4, Signal Too High (Aw50/51 AWD; Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S4
      • Checking solenoid S4
      • Checking the wiring
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0107: Shift Solenoid S4, Signal Too High (Aw50/51 AWD; Aw55-50/51SN; 2003-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S4
      • Checking solenoid S4
      • Checking the wiring
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0108: Shift Solenoid S4, Signal Missing (Aw50/51 AWD; Aw55-50/51SN; 2003-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S4
      • Checking resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Verification
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
    • Verification
      • Verification
• TCM-0108: Shift Solenoid S4, Signal Missing (Aw50/51 AWD; Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S4
      • Checking the resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Verification
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
    • Verification
      • Verification
• TCM-0108: Shift Solenoid S4, Signal Missing (Aw50/51 AWD; Aw55-50/51SN; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S4
      • Checking resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Verification
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor, ignition on
      • Checking transmission fluid temperature sensor, ignition off
      • Checking transmission fluid temperature sensor, fault tracing
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
    • Verification
      • Verification
• TCM-0109: Shift Solenoid S4, Signal Too Low (Aw50/51 AWD; Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Preparation
      • Checking the temperature sensor
      • Checking shift solenoid S4
      • Checking the resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification, reinstalling components
      • Verification
    • Information
      • Fault-tracing information, fault-tracing has failed
      • Fault-tracing information, fault does not recur
    • Faulty signal
      • Checking transmission fluid temperature sensor
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
    • Verification, transmission temperature
      • Verification