FixVault

Light Functions

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2011 Volvo V50, 2010 Volvo V50, 2009 Volvo V50, 2008 Volvo V50, and 2007 Volvo V50. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Light Functions - V50
GLL139833Courtesy of VOLVO CARS CORPORATION

The interior lighting is checked by the central electronic module (CEM). The interior lighting comes on when the vehicle is unlocked.

Further light functions are included in the central locking system:

Local lighting 

Local lighting is activated using the remote control. The following light when activated:

The default setting is for the lighting to be on for 30 seconds or until the key is turned in the ignition switch. This time can be adapted to the wishes of the customer.

Approach lights 

There is a function for approach lights as part of the lighting system. When the engine is off, the key is removed from the ignition and the dip switch is activated, the following lights:

The default setting for the lighting is 30 seconds. This time can be adapted to the wishes of the customer.

Customer settings 

The duration that the local lighting and approach lights are on can be adapted to the wishes of the customer.

For information about customer adaptations, see DESCRIPTION OF PROGRAMMABLE PARAMETERS, CUSTOMER ADAPTATION