Downloading Software And Replacing The Control Module

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2011 Volvo V50, 2010 Volvo V50, 2009 Volvo V50, 2008 Volvo V50, and 2007 Volvo V50. However, it is still accessible from the selected car via links, so may be relevant.

New software can be downloaded into the climate control module (CCM). When ordering software, the hardware and the software in the car is compared to the information in the Volvo central database. If the comparison is OK the software is downloaded to the control module.

If the comparison between the car and Volvo central database is not OK, the database is updated with the car configuration. When this is complete the software is downloaded.

The entire climate control module (CCM) must be replaced as one unit.

Two different customer parameters can be programmed into the climate control module (CCM). These customer parameters are stored in the control module but not in the Volvo central database. This means that the customer parameters must be reprogrammed when hardware is replaced.

For further information about programmable customer parameters, see PROGRAMMING THE CLIMATE CONTROL MODULE (CCM), CUSTOMER ADAPTATION