Air conditioning (A/C) compressor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Air Conditioning (A/C) Pressure Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

The air conditioning (A/C) pressure sensor detects the pressure in the high-pressure side of the air conditioning (A/C) system. This is so the engine control module (ECM) can control:

start-up of the engine cooling fan (FC)
stopping the compressor if the pressure in the air conditioning (A/C) is too high
constant idle speed compensation for the air conditioning (A/C) compressor load.

The sensor is linear. It is grounded in the control module and supplied with a 5 Volt current from the control module. A linear signal (between 0-5 V depending on the pressure in the air conditioning (A/C) is transmitted to the control module. Low pressure produces low voltage, high pressure produces high voltage.

The engine control module (ECM) can diagnose the air conditioning (A/C) pressure sensor. The sensor value can be read off using VIDA.

The air conditioning (A/C) pressure sensor is positioned on the high pressure delivery line for the air conditioning (A/C) system.