Breakout Box, Connecting

Ignition off
For information on releasing the forward sensoring module (FSM) connector, see COLLISION WARNING CONTROL MODULE

Connect the breakout box see 9511428 and cable harness see 9511499 to the adapter.

Forward Sensing Module (FSM)

Connect the adapter see 9513013 to control module connector C1.
For connector C1, terminals #C1:1-#C1:30 correspond to terminals #1-#30 on the breakout box.

NOTE:

Before the control module can be checked and readings taken, the removed fuses must first be refitted.

Other information

For further information on signals and other values, see SIGNAL DESCRIPTION
For further information on fuses and grounding points, see the relevant wiring diagram.