Connecting Breakout Box

Fig 1: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Remove the fuse
• Remove the side panel
• Disconnect the control module connector.

Connect adapter to the control module connector. Connect breakout box and wiring to the adapter. See 9511463 See 9511428 See 9511499

Alternatively, breakout box can be connected to the adapter. See 9813190

Disconnect the breakout box in reverse order.

Other information: 

• For left-hand drive cars, see SIGNAL SPECIFICATION
• See CONTROL MODULE FRONT SEAT