Checking The Component And Wiring

Check the cable between phone module (PHM) connector B and the connector for the SIM card reader. Check for an open-circuit.

Check between:

• control module connector terminal B#1 (#21) and SIM card reader connector terminal #1
• control module connector terminal B#2 (#22) and SIM card reader connector terminal #2
• control module connector terminal B#3 (#3) and SIM card reader connector terminal #3
• control module connector terminal B#4 (#4) and SIM card reader connector terminal #4
• control module connector terminal B#5 (#5) and SIM card reader connector terminal #5
• control module connector terminal B#6 (#6) and SIM card reader connector terminal #6.

Check the connectors for loose connections, damaged or bent terminal pins and oxidation.

Try replacing the SIM card reader if no fault is found in the cable.

Remedy as necessary.

Other information: 

• see SIGNAL SPECIFICATION
• see CONNECTING THE BREAKOUT BOX
• see LOCATION OF COMPONENTS
• see PHONE MODULE (PHM) (2011)
• see SIM CARD READER (2011)
• see CONTENTS

• Continue 

  Refer to VERIFICATION