FixVault

Side Members, Front (2016 - 20)

Fig 1: Body Dimension Measuring Point Symbols
GLL155440Courtesy of VOLVO CARS CORPORATION
  1. Measure from the center
  2. Measure from the edge
  3. Measure from the cut mark
GLL155442Courtesy of VOLVO CARS CORPORATION

Measurement takes place from the bottom of the recess. See illustration above. If only a measuring point symbol is shown this applies to both measuring points. Otherwise the symbols are shown on one side each of the measurement designation in the figure.

Fig 2: Upper Front Side Member Position Dimensions And Measurement Locations (1 Of 3)
GLL1000176Courtesy of VOLVO CARS CORPORATION
Fig 3: Upper Front Side Member Position Dimensions And Measurement Locations (2 Of 3)
GLL1011218Courtesy of VOLVO CARS CORPORATION
Fig 4: Upper Front Side Member Position Dimensions And Measurement Locations (3 Of 3)
GLL1015140Courtesy of VOLVO CARS CORPORATION
Fig 5: Lower Front Side Member Position Dimensions And Measurement Locations (1 Of 4)
GLL1024193Courtesy of VOLVO CARS CORPORATION
Fig 6: Lower Front Side Member Position Dimensions And Measurement Locations (2 Of 4)
GLL1026106Courtesy of VOLVO CARS CORPORATION
Fig 7: Lower Front Side Member Position Dimensions And Measurement Locations (3 Of 4)
GLL1020110Courtesy of VOLVO CARS CORPORATION
Fig 8: Lower Front Side Member Position Dimensions And Measurement Locations (4 Of 4)
GLL1036759Courtesy of VOLVO CARS CORPORATION