Rear Window: Disassembly

Comply with the following instructions to replace rear window:

ATTENTION: Please wear safety gloves for the following operation. 

1. To replace rear window when it is cracked or broken:
   1. Remove the broken glass pieces.
   2. Remove the backboard guardrail with a wrench.
   3. Take off the strips from rear window frame.
   4. Clean up the broken glass pieces in strip channel.

      ATTENTION: When cleaning up, protect vehicle body from scratches caused by broken glass pieces. 

2. To replace rear window when it is scratched:

   Raise the border of the rear window rubber molding with a slotted screwdriver while removing the glass by pushing slowly upwards. Turn the borders of the molding along the window frame slowly until all the edges turn out from the edge of the window frame. Take off the molding and remove the adhesive from the glass.

   ATTENTION: This operation should be carried out carefully. Be careful not to scratch vehicle body when using screwdriver. 

   Fig 1: Identifying Rear Window Rubber Moulding

   Courtesy of LIUZHOU WULING MOTORS CO., LTD.
Fig 2: Identifying Back Door Windowpane And Rubber Strip
Courtesy of LIUZHOU WULING MOTORS CO., LTD.