FixVault
Home › Acura › 2007 › TL Base › Repair and Diagnosis › Accessories & Equipment › Anti-Theft Systems › Keyless/Power Door Locks/Security System › Hood Switch Test

Hood Switch Test

  1. Open the hood.
  2. Remove the hood latch cover (see HOOD LATCH REPLACEMENT ).
  3. Disconnect the 2P connector from the hood switch.
    Fig 1: Identifying Hood Switch 2P Connector
    G05462650Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Check for continuity between the terminals. There should be continuity between the No. 1 and No. 2 terminals when the hood is opened (latch released). There should be no continuity between the No. 1 and No. 2 terminals when the hood is closed (latch pushed down).
  5. If the continuity is not as specified, replace the hood latch (see HOOD LATCH REPLACEMENT ).
About FixVault