Function 01 - Check Abs Control Module Versions

NOTE: Control module version can only be altered when installing a new control module.

1. Turn ignition off. Connect scan tool, see EQUIPMENT HOOK-UP  . In BRAKE ELECTRONICS function, press 01 for CHECK CONTROL MODULE VERSIONS.
2. When CHECK CONTROL MODULE VERSIONS function is entered, scan tool will identify last workshop performed last coding procedure along with following:
   • Control Module Index
   • System Designation
   • Hardware and Software Status
   Press forward arrow to read control module version. See Fig 1 - Fig 5 . If during testing it is determined that control module requires coding, go to FUNCTION 07 - CODE CONTROL MODULE  under DIAGNOSIS.

Fig 1: Identifying ABS/EDL Control Module Version (1 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Fig 2: Identifying ABS/EDL Control Module Version (2 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Fig 3: Identifying ABS/EDL/ARS Control Module Version (3 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Fig 4: Identifying ABS/EDL/ARS Control Module Version (4 Of 5)

Courtesy of AUDI OF AMERICA, INC.

Fig 5: Identifying ABS/EDL/ARS/ESP Control Module Versions (5 Of 5)

Courtesy of AUDI OF AMERICA, INC.