FixVault
Home › Chevrolet › 2006 › Epica LTZ › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.5L (LBK) - DTC P0030 To DTC P0230 › DTC P0114 › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the IAT sensor parameter with a scan tool while moving the IAT sensor connector and the ECM connector. The IAT sensor parameter should not fluctuate while moving the related harnesses and connectors.
  2. Operate the vehicle within the conditions for running the DTC. DTC P0114 should not set.
  3. If the vehicle passes the Circuit/System Verification Test, then operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records Data List.
About FixVault