Engine Control System - 2.5L (LBK) - DTC P0030 To DTC P0230

• DTC P0030, P0031, P0032, P0036, P0037, P0038, P0050, P0051, P0052, P0056, P0057, or P0058
  • DTC Descriptors
  • Diagnostic Fault Information
  • Circuit Description
  • Conditions for Running the DTC
    • P0031, P0032, P0037, P0038, P0051, P0052, P0057, or P0058
    • P0030 or P0050
    • P0036 or P0056
  • Conditions for Setting the DTC
    • P0031, P0032, P0037, P0038, P0051, P0052, P0057, or P0058
    • P0030 or P0050
    • P0036 or P0056
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0101, P0102, or P0103
  • DTC Descriptors
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
    • P0101
    • P0102 and P0103 w/o Throttle Actuator Control
    • P0102 and P0103 with Throttle Actuator Control
  • Conditions for Setting the DTC
    • P0101
    • P0102 w/o Throttle Actuator Control
    • P0102 with Throttle Actuator Control
    • P0103 w/o Throttle Actuator Control
    • P0103 with Throttle Actuator Control
  • Action Taken When the DTC Sets
  • Conditions for Clearing the DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0106
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Condition for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0107 or P0108
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
    • P0107 or P0108
  • Conditions for Setting the DTC
    • P0107
    • P0108
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
    • Special Tools Required
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0111
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
    • Notes
    • Conditions for Running the DTC
      • Condition 1
      • Condition 2
      • Condition 3
  • Conditions for Setting the DTC
    • Condition 1
    • Condition 2
    • Condition 3
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0112 or P0113
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
    • P0112
    • P0113
  • Conditions for Setting the DTC
    • P0112
    • P0113
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0114
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0116
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
    • Condition 1
    • Condition 2
    • Condition 3
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0117 or P0118
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
    • P0117
    • P0118
  • Conditions for Setting the DTC
    • P0117
    • P0118
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0119
  • DTC Descriptor
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0121, P0122, P0123, P0222, or P0223 (w/o Throttle Actuator Control)
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
    • P0121
    • P0122, P0123, P0222, or P0223
  • Conditions for Setting the DTC
    • P0121
    • P0122
    • P0123
    • P0222
    • P0223
  • Action Taken When the DTC Sets
  • Conditions for Clearing the DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
    • TP Sensor
    • ISC Motor Position Sensor
  • Repair Procedures
• DTC P0121, P0122, P0123, P0221, P0222, or P0223 (w/Throttle Actuator Control)
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit/System Description
  • Conditions for Running the DTC
    • P0121 or P0221
    • P0122, P0123, P0221, or P0223
  • Conditions for Setting the DTC
    • P0121 or P0221
    • P0122
    • P0123
    • P0222
    • P0223
  • Action Taken When the DTC Sets
  • Conditions for Clearing the DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0125 or P0128
  • DTC Descriptors
  • Diagnostic Fault Information
  • Circuit Description
  • Conditions for Running the DTC
    • P0125
    • P0128
  • Conditions for Setting the DTC
    • P0125
    • P0128
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures
• DTC P0130 or P0150
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTCs
  • Conditions for Setting the DTCs
  • Action Taken when the DTCs Set
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0131 or P0151
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
    • P0131
    • P0151
  • Action Taken when the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0132 or P0152
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken when the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0133 or P0153
  • DTC Descriptors
  • Diagnostic Fault Information
  • Circuit Description
  • Conditions for Running the DTCs
  • Conditions for Setting the DTCs
  • Action Taken when the DTCs Set
  • Conditions for Clearing the MIL/DTCs
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0134 or P0154
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTCs
  • Conditions for Setting the DTCs
  • Action Taken when the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0136 or P0156
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTCs
  • Conditions for Setting the DTCs
  • Action Taken when the DTCs Set
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0137 or P0157
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTCs
  • Conditions for Setting the DTC
  • Action Taken when the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0138 or P0158
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTCs
  • Conditions for Setting the DTCs
  • Action Taken when the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0139 or P0159
  • DTC Descriptors
  • Diagnostic Fault Information
  • Circuit Description
  • Conditions for Running the DTCs
  • Conditions for Setting the DTCs
  • Action Taken when the DTCs Set
  • Conditions for Clearing the MIL/DTCs
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0140 or P0160
  • DTC Descriptors
  • Diagnostic Fault Information
  • Typical Scan Tool Data
  • Circuit Description
  • Conditions for Running the DTCs
  • Conditions for Setting the DTCs
  • Action Taken when the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Repair Procedures
• DTC P0171, P0172, P0174, or P0175
  • DTC Descriptors
  • Diagnostic Fault Information
  • Circuit Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
    • P0171 or P0174
    • P0172 or P0175
  • Action Taken When the DTC Sets
  • Conditions for Clearing the MIL/DTC
  • Diagnostic Aids
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
    • P0171 or P0174
    • P0172 or P0175
  • Repair Procedures
• DTC P0230
  • DTC Descriptor
  • Diagnostic Fault Information
  • Circuit/System Description
  • Conditions for Running the DTC
  • Conditions for Setting the DTC
  • Action Taken When the DTC Sets
  • Conditions for Clearing the DTC
  • Reference Information
    • Schematic Reference
    • Connector End View Reference
    • Electrical Information Reference
    • DTC Type Reference
    • Scan Tool Reference
  • Circuit/System Verification
  • Circuit/System Testing
  • Component Testing
  • Repair Procedures