FixVault
Home › Chevrolet › 2006 › Impala SS › Repair and Diagnosis › Engine Performance › System › Engine Control System - 5.3L - Introduction (2 Of 2) › Repair Instructions › Accelerator Pedal with Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing The Left Instrument Panel Sound Insulator
    GM1618756Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel (I/P) sound insulator. Refer to Closeout/Insulator Panel Replacement - Left .
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).
    3. Fig 2: Removing The APP Sensor Assembly Bolts
    GM1618780Courtesy of GENERAL MOTORS CORP.
  3. Remove the APP sensor assembly bolts.
  4. Remove the APP sensor assembly from the vehicle.
About FixVault