Water Outlet Replacement

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Water Outlet Housing

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the radiator inlet hose. Refer to Radiator Inlet Hose Replacement . Remove the right engine mounting bracket. Refer to ENGINE REAR MOUNT REPLACEMENT .
1	Water Outlet Housing Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure: Remove the water outlet housing bolts. Tighten: 10 N.m (89 lb in)
2	Water Outlet Housing
3	Seal Procedure Remove the water outlet housing seal. Discard the seal. Install a new water outlet housing seal.